Lauda PROLINE P 5 C, Руководство по эксплуатации

Страница: 38 / 120

38 / 123 Proline heating thermostat 02/2022
7.7 Important settings
7.7.1 Temperature setpoint setting
The setpoint is the temperature which the thermostat should reach and maintain constant.
Master (main level)
SEt
 Press key until
SEt
(Setpoint) appears.
 Press, display flashes.
or  Enter the setpoint with the two keys (

Section 7.4.1 General key func-
tions and pilot lamps).
Wait 4 seconds or  Display flashes 4 s

new value is automatically accepted, or
value is accepted immediately with Enter key.


For safety reasons the setpoint can only be set up to 2 °C above upper limit
of the operating temperature range for the relevant device type.

In the following cases the manual setpoint entry is blocked:
Setpoint is taken from the analog module, from the programmer in the
Command remote control or via the serial interface.
Command
T
set
or T
fix

or the soft key T
set
opens the set-
point window.
 123.45 is the setpoint which is still active.
The upper and lower limit temperatures are dis-
played (device-specific values).
There are three different possible entry methods:
1. Change the value with the or keys. First
you vary the 1/10 °C values. If you hold the
key pressed longer, then full degrees change.
2. Enter the complete number with the numerical
duo keys and the key for the negative sign
and decimal point.
3. Using or , move the flashing cursor line
to the decimal place which you would like to
change and then change it with or .
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Enter new setpoint:
123,
45
Min: -40,00°C Max:202,00°C