Lauda PROLINE P 5 C, Руководство по эксплуатации

Страница: 65 / 120

02/2022 Proline heating thermostat 65 / 123
Command
Programmer Program1 Edit Modify
 In the Edit menu one can Modify or Delete
a program.
 Press the key.

Continue to Modify . with the key . .
 There is the possibility of modifying single seg-
ments, i.e. segments can be entered as new,
changed and also deleted.
No. T end °C Time [h:m] Tolerance
Start 30,00°C ------- 3,00°C
1 30,00°C 00:30 3,00°C
Pump Menu End Insert Delete
 In the "Start" line enter in the field "T end °C"
the temperature at which the sequence is to
start (default value is 30 °C). A time entry is
not possible in the "Start" segment, because the
thermostat immediately executes Segment 1
on reaching the start temperature.
 Delete single segments (rows) with
Delete .

For thermostats without cooling ability, the
setpoint temperature must be obtainable, i.e.
above the bath temperature displayed at the
time of the program start!

Using the cursor keys move the black background to the field which you would like to change. It can be edit-
ed by pressing the key (see following pages).

The soft key Insert inserts in the marked line a new segment which has a default value taken from the
previous segment with the exception of the tolerance field. The tolerance is always specified as 0.00. All fol-
lowing segment lines will be moved one line downwards.

In the above window Segment 1 was created in this way.

Continue with to the fields

"Time”

"Tolerance". See program example in (

7.10.1).
 If there is no entry in the "Time" field, the bath temperature is approached as quickly as possible. With a time
entry the final temperature is obtained exactly after the time expires (ramp).
 The entry in the field "Tolerance" field defines how accurately the final temperature is to be obtained before
the next segment is processed. In case there is no additional cooling, you should select a more generous tol-
erance limit. Check and observe the transient effect using the “graphic display” (

Section 7.9).
Pump Menu End T
set
T
fix
Status
Edit
Loops
Graph
Info
Modify
Delete