9: Service Settings
XPort Pro User Guide
68
Note:
The following section describes the steps to configure PPP 1 (PPP on serial line
1); these steps also apply to any line instance of the device.
To configure PPP:
1.
Select
PPP
on the menu bar. The PPP web page appears.
2.
Select a line number at the top of the page. The PPP Configuration page for the selected line
number appears.
Figure 9-2 PPP Configuration Settings
3.
Enter or modify the following settings:
Table 9-3
PPP Configuration
4.
Click
Submit.
PPP Configuration Settings
Description
Local IP Address
Enter the IP address assigned to the device’s PPP interface.
Peer IP Address
Enter the IP address assigned to the peer (when requested during
negotiation).
Authentication Mode
Choose the authentication mode:
None
= no authentication is required
PAP
= Password Authentication Protocol
CHAP
= Challenge Handshake Authentication Protocol
MS-CHAP
= Microsoft Challenge-Handshake Authentication
Protocol
MS-CHAPV2
= Microsoft Challenge-Handshake Authentication
Protocol Version 2
Username
Enter a username if authentication is to be used on the PPP
interface. The peer must be configured to use the same username.
Password
Enter a password if authentication is to be used on the PPP
interface. The peer must be configured to use the same password.
Содержание XPortPro
Страница 1: ...Part Number 900 560 Revision D April 2012 XPort Pro User Guide ...
Страница 122: ...12 Maintenance and Diagnostics Settings XPort Pro User Guide 122 Figure 12 30 Diagnostics Processes ...
Страница 134: ...13 Advanced Settings XPort Pro User Guide 134 Figure 13 12 XML Import Configuration from External File ...
