6: Line and Tunnel Settings
XPort Pro User Guide
43
Tunnel – Accept Mode
Controls how a specific tunnel number behaves when a connection attempt originates from the
network. In Accept Mode, the XPort Pro waits for a connection from the network. The configurable
local port is the port the remote device connects to for this connection. There is no remote port or
address. The default local port is 10001 for serial port 1 and increases sequentially for each
additional serial port, if supported.
Accept Mode supports the following protocols:
SSH (the XPort Pro is the server in Accept Mode). When using this protocol, the SSH
server host keys and at least one SSH authorized user must be configured.
SSL
TCP
AES encryption over TCP
Telnet (The XPort Pro supports IAC codes. It drops the IAC codes when Telnetting and
does not forward them to the serial port).
Accept Mode has the following states:
Disabled (never a connection)
Enabled (always listening for a connection)
Active if it receives any character from the serial port
Active if it receives a specific (configurable) character from the serial port (same start
character as Connect Mode’s start character)
Modem control signal (when the modem control pin is asserted on the serial line
corresponding to the tunnel)
Modem emulation
To configure the Accept Mode of a specific tunnel:
1.
Select
Tunnel
on the menu bar, if you are not already in the Tunnel web page.
2.
Select a tunnel number at the top of the page.
3.
Select
Accept Mode
. The Accept Mode page for the specific tunnel appears.
Содержание XPortPro
Страница 1: ...Part Number 900 560 Revision D April 2012 XPort Pro User Guide ...
Страница 122: ...12 Maintenance and Diagnostics Settings XPort Pro User Guide 122 Figure 12 30 Diagnostics Processes ...
Страница 134: ...13 Advanced Settings XPort Pro User Guide 134 Figure 13 12 XML Import Configuration from External File ...
