6: Line and Tunnel Settings
XPort Pro User Guide
35
4.
Enter or modify the following settings:
Table 6-5
Line Command Mode
Line Command Mode
Setting the Command Mode
enables the CLI on the serial
line.
To configure Command
Mode on a specific line:
1.
Select
Line
on the menu
bar, if you are not already
in the Line web page.
2.
Select a line number at the
top of the page.
3.
Select Command Mode.
The Command Mode page
for the selected line
appears.
Figure 6-4 Line 1 Command Mode
Line – Command Mode
Settings
Description
Mode
Select the method of enabling Command Mode or choose to disable Command
Mode.
Always
= immediately enables Command Mode for the serial line.
Use Serial String
= enables Command Mode when the serial string is read
on the serial line during boot time.
Use CP Group
= enables Command Mode based on the status of a CP
Group. When the value matches the current value of the group, Command
Mode is enabled on the serial line.
Use both Serial String and CP Group
= the serial string and the value of
the CP group must be matched to enable Command Mode.
Disabled
= turns off Command Mode.
Wait Time
Enter the wait time for the serial string during boot-up in milliseconds.
Содержание XPortPro
Страница 1: ...Part Number 900 560 Revision D April 2012 XPort Pro User Guide ...
Страница 122: ...12 Maintenance and Diagnostics Settings XPort Pro User Guide 122 Figure 12 30 Diagnostics Processes ...
Страница 134: ...13 Advanced Settings XPort Pro User Guide 134 Figure 13 12 XML Import Configuration from External File ...
