4: Quick Setup
SLC™ Console Manager User Guide
39
Figure 4-5 Quick Setup
4.
To accept the defaults, select the
Accept
default Quick Setup settings checkbox in the top
portion of the page and click the
Apply
button at the bottom of the page. Otherwise, continue
with step 5.
Note:
Once you click the Apply button on the Quick Setup page, you can continue using
the web interface to configure the SLC console manager further.
5.
Enter the following settings:
Network Settings
Note:
Configurations with the same IP subnet on multiple interfaces (Ethernet or PPP)
are not currently supported.
Network Setting
Description
Eth 1 Settings
Obtain from DHCP:
Acquires IP address, subnet mask, hostname and gateway
from the DHCP server. (The DHCP server may not provide the hostname
gateway, depending on its setup.) This is the default setting. If you select this
option, skip to
Gateway
.
Obtain from BOOTP:
Lets a network node request configuration information from
a BOOTP "server" node. If you select this option, skip to
Gateway
.
Specify:
Lets you manually assign a static IP address, generally provided by the
system administrator.
Содержание SLC8
Страница 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Страница 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Страница 150: ...10 USB Port SLC Console Manager User Guide 150 Figure 10 3 Devices USB Modem 3 Enter the following fields...
Страница 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
