8: Device Ports
SLC™ Console Manager User Guide
134
CHAP Secret
The CHAP secret associated with this site. If a modem has sites enabled and
CHAP authentication enabled, then at dial-in, if the remote server sends a name
in the CHAP challenge response that matches the CHAP host of a site, the CHAP
secret for the site will be used to authenticate the CHAP challenge response sent
by the remote server.
Authentication
The type of authentication,
PAP
or
CHAP
, for which this site is applicable. On
dial-in authentication, only sites with the authentication type that matches the
authentication type configured for the modem will be used to try to find a matching
site.
Timeout Logins
For text dial-in connections, the connection can time out after the connection is
inactive for a specified number of minutes.
Negotiate IP Address
If the SLC console manager and the remote server should negotiate the IP
addresses for each side of the PPP connection, select
Yes
. Select
No
if the
address of the SLC unit (
Local IP
) and remote server (
Remote IP
) need to be
specified.
Static Route IP
Address
The Static Route IP Address, Subnet Mask and Gateway must be configured for
dial-on-demand sites. The SLC device will automatically dial-out and establish a
PPP connection when IP traffic destined for the network specified by the static
route needs to be sent.
Note:
Static Routing must be enabled on the Network - Routing page for dial-on-
demand connections.
Static Route Subnet
Mask
The subnet mask for a dial-on-demand connection.
Static Route Gateway
The gateway for a dial-on-demand connection.
Dial-out Number
The dial-out number must be specified for dial-on-demand sites. This indicates
the phone number to dial when the SLC console manager needs to send IP
traffice for a dial-on-demand connection.
Dial-out Login
User ID for authentication when dialing out to a remote system. May have up to
32 characters. This ID is used for authenticating the SLC unit during the dial-out
portion of a dial-back (including CBCP server) and dial-on-demand.
Dial-out Password
Enter the password for authentication when dialing out to a remote system. May
have up to 64 characters. This password is used for authenticating the SLC
device during the dial-out portion of a dial-back (including CBCP server) and dial-
on-demand.
Retype Password
Re-enter the password for authentication when dialing out to a remote system.
May have up to 64 characters. This password is used for authenticating the SLC
console manager during the dial-out portion of a dial-back (including CBCP
server) and dial-on-demand.
Dial-back Number
The phone number to dial on callback for text or PPP dial-back connections. A
site must successfully authenticate, have
Allow Dial-back
enabled and have a
Dial-back Number defined in order for the site to be used for callback.
Allow Dial-back
If enabled, the site is allowed to be used for dial-back connections.
Dial-back Delay
For dial-back and CBCP Server, the number of seconds between the dial-in and
dial-out portions of the dialing sequence.
Dial-back Retries
For dial-back and CBCP Server, the number of times the SLC unit will retry the
dial-out portion of the dialing sequence if the first attempt to dial-out fails.
Modem Timeout
Timeout for dial-in and dial-on-demand PPP connections. Select
Yes
(default) for
the SLC device to terminate the connection if no traffic is received during the
configured idle time. Enter a value of from 1 to 9999 seconds. The default is 30
seconds.
Содержание SLC8
Страница 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Страница 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Страница 150: ...10 USB Port SLC Console Manager User Guide 150 Figure 10 3 Devices USB Modem 3 Enter the following fields...
Страница 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
