8: Device Ports
SLC™ Console Manager User Guide
135
3.
Click the
Add Site
button.
To view or update a site:
1.
In the
Sites
table, select the site and click the
View Site
button. The site attributes are
displayed in the bottom half of the page.
2.
Update any of the site attributes.
3.
Click the
Edit Site
button.
To delete a site:
1.
Select the site in the
Sites
table.
2.
Click the
Delete Site
button.
Configures a set of site-oriented modem parameters that can be activated by various modem-
related events (authentication, outbound network traffic for DOD connections, etc.).
The site parameters will override any parameters configuredfor the modem.
Uses sites with a modem, enable 'usesites'. Sites can be used with the following modem states:
dialin, dialback, cbcpserver, dialondemand, ondemand, and dondemand.
To create or edit a site:
set site add|edit <Site Name> [<parameters>]
Parameters:
name <Site Name> (edit only) dialoutnumber <Phone Number>
deviceport <Device Port # or Name or none> dialoutlogin <User Login>
usbport <U1|U2> dialoutpassword <Password>
pccardslot <upper|lower> allowdialback <enable|disable>
auth <pap|chap> dialbacknumber <Phone Number>
loginhost <User Login/CHAP Host> dialbackdelay <Dial-back Delay>
chapsecret <CHAP Secret> dialbackretries <1-10>
localipaddr <negotiate|IP Address> timeoutlogins <disable|1-30
minutes>
remoteipaddr <negotiate|IP Address> modemtimeout <disable|1-9999 secs>
routeipaddr <IP Address> routemask <Mask>
restartdelay <PPP Restart Delay> cbcpnocallback <enable|disable>
routegateway <Gateway> nat <enable|disable>
To delete a site:
set site delete <Site Name>
show site <all|names|Site Name>
Restart Delay
The number of seconds after the modem timeout and before the SLC console
manager attempts another connection. The default is 30 seconds.
CBCP Server
Allow No Callback
For a CBCP Server site, allows "No Callback" as an option in the CBCP
handshake in addition to User-defined Number and Admin-defined Number.
Enable NAT
Select to enable Network Address Translation (NAT) for PPP connections.
Note:
IP forwarding must be enabled on the Network - Settings page for NAT to
work.
Содержание SLC8
Страница 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Страница 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Страница 150: ...10 USB Port SLC Console Manager User Guide 150 Figure 10 3 Devices USB Modem 3 Enter the following fields...
Страница 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
