Lantronix SLC 8000, Руководство пользователя

Страница: 194 / 337

11: User Authentication
SLC™ 8000 Advanced Console Manager User Guide 194
4. Select or clear the checkboxes for the following rights:
5. Click the Apply button.
Note: You must reboot the unit before your changes will take effect.
LDAP Commands
These commands for the command line interface correspond to the web page entries described
above.
To configure the SLC unit to use LDAP to authenticate users who log in via the Web, SSH,
Telnet, or the console port:
set ldap <one or more parameters>
Parameters
adsupport <enable| disable >
Enables or disables active directory.
base <LDAP Base>
bindname <Bind Name>
breakseq <1-10 Chars>
Full Administrative Right to add, update, and delete all editable fields.
Networking Right to enter Network settings.
Services Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
SMTP.
Secure Lantronix
Network Right to view and manage secure Lantronix units (e.g., SLP, Spider, or SLC
devices) on the local subnet.
Date/Time Right to set the date and time.
Reboot & Shutdown Right to shut down and reboot the SLC unit.
Local Users Right to add or delete local users on the system.
Remote
Authentication Right to assign a remote user to a user group and assign a set of rights to the user.
SSH Keys Right to set SSH keys for authenticating users.
User Menus Right to create a custom user menu for the CLI for NIS users.
Web Access Right to access Web-Manager.
Diagnostics &
Reports Right to obtain diagnostic information and reports about the unit.
Firmware &
Configuration Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects
Reboot & Shutdown .
Internal Modem Right to configure internal modem settings.
Device Port
Operations Right to enter device port settings.
Device Port
Configuration Right to enter device port configurations.
USB Right to enter modem settings for USB.
SD Card Right to view and enter settings for SD card.