manualshive.com logo in svg

Lantronix SLC 8000, Руководство пользователя

Lantronix SLC 8000 - устройство управления консолью, обеспечивающее удаленный доступ и мониторинг для различных устройств. Получите бесплатное Демо руководство на нашем сайте для ознакомления с функционалом продукта. Скачать руководство с сайта manualshive.com и управляйте вашими устройствами эффективно и безопасно.

Поделиться
Скачать
background image

9: USB/SD Card Port

SLC™ 8000 Advanced Console Manager User Guide

163

PPP Mode

Negotiate IP Address

If the SLC unit and/or the serial device have dynamic IP addresses (e.g., IP 
addresses assigned by a DHCP server), select 

Yes

. 

Yes

 is the default.

If the SLC unit or the modem have fixed IP addresses, select 

No

, and enter the 

Local IP

 (IP address of the port) and 

Remote IP

 (IP address of the modem). 

Authentication

Enables 

PAP

 or 

CHAP

 authentication for modem logins. 

PAP

 is the default. 

With PAP, users are authenticated by means of the Local Users and any of the 
remote authentication methods that are enabled. With CHAP, the CHAP 
Handshake fields authenticate the user.

CHAP Handshake

The 

Host/User Name

 (for UNIX systems) or 

Secret/User Password 

(for 

Windows systems) used for CHAP authentication. May have up to 128 characters.

CHAP Auth Uses

For CHAP authentication, determines what is used to validate the CHAP host/
user sent by the remote peer: either the 

CHAP Host

 defined for the modem, or 

any of the users in the 

Local Users

 list.

Same authentication for 
Dial-in & Dial-on-Demand 
(DOD)

Select this option to let incoming connections (dial-in) use the same 
authentication settings as outgoing connections (dial-on-demand). If this option 
is not selected, then the dial-on-demand connections take their authentication 
settings from the DOD parameter settings. If 

DOD Authentication

 is 

PAP

, 

then the

 DOD CHAP Handshake

 field is not used. 

DOD Authentication

Enables 

PAP

 or 

CHAP

 authentication for dial-in & dial-on-demand. 

PAP

 is the 

default. With PAP, users are authenticated by means of the Local Users and 
any of the remote authentication methods that are enabled. With CHAP, the 
DOD CHAP Handshake fields authenticate the user.

DOD CHAP Handshake

For 

DOD Authentication

, enter the 

Host/User Name

 for UNIX systems) or 

Secret/User Password

 (for Windows systems) used for CHAP authentication. 

May have up to 128 characters.

Enable NAT

Select to enable Network Address Translation (NAT) for dial-in and dial-out 
PPP connections on a per modem (device port or USB port) basis. Users 
dialing into the SLC access the network connected to Eth1 and/or Eth2.

Note:

IP forwarding must be enabled on the Network > Network Settings page 

for NAT to work. See 

Chapter 6: Basic Parameters on page 57

.

Dial-out Number

Phone number for dialing out to a remote system or serial device. May have up 
to 20 characters. Any format is acceptable.

Remote/Dial-out Login

User ID for authentication when dialing out to a remote system, or if a remote 
system requests authentication from the SLC device when it dials in. May have up 
to 32 characters. This ID is used for authenticating the SLC unit during the dial-out 
portion of a dial-back (including CBCP server) and dial-on-demand.

Remote/Dial-out Pwd

Password for authentication when dialing out to a remote system, or if a 
remote system requests authentication from the SLC unit when it dials in. May 
have up to 64 characters.

Retype

Re-enter password for dialing out to a remote system. May have up to 64 
characters.

Restart Delay

The number of seconds after the timeout and before the SLC 8000 advanced 
console manager attempts another connection. The default is 

30

 seconds.

CBCP Server 
Allow No Callback

For CBCP Server state, allows "No Callback" as an option in the CBCP 
handshake in addition to User-defined Number and Admin-defined Number. 

CBCP Client Type

For CBCP Client, this selects the number that the client would like to use for 
callback - either a user-defined number passed to the server (specified by the 
Fixed Dial-back Number) or an administrator-defined number determined by 
the server based on the login that is PAP or CHAP authenticated.

Содержание SLC 8000


















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SLC 8000

K-array Azimut Series Reference Manual preview
Azimut Series
Бренд: K-array Страницы: 20
Taco 00e Series Installation/Operation Instruction Manual preview
00e Series
Бренд: Taco Страницы: 56
Teac CD-X9 Owner'S Manual preview
CD-X9
Бренд: Teac Страницы: 24
TeachLogic Maxim III Installation Manual preview
Maxim III
Бренд: TeachLogic Страницы: 21
TCS IVX9001-0140 Product Information preview
IVX9001-0140
Бренд: TCS Страницы: 30
CAMDEN Invision CV-TAC400 Installation Manual preview
Invision CV-TAC400
Бренд: CAMDEN Страницы: 124
Bticino 323004 Quick Start Manual preview
323004
Бренд: Bticino Страницы: 2
R. Beck Maschinenbau 197.100.00 Operating Manual preview
197.100.00
Бренд: R. Beck Maschinenbau Страницы: 34
RAPIBREW FREDDA 1.0 Service Manual preview
FREDDA 1.0
Бренд: RAPIBREW Страницы: 67
rav RAV6351 ILPVS1340 Manual preview
RAV6351 ILPVS1340
Бренд: rav Страницы: 152
Tyco Fire Product Star Pulsar ESFR-1 Instruction Manual preview
Star Pulsar ESFR-1
Бренд: Tyco Fire Product Страницы: 4
Daewoo RH-4353GU Wiring Diagram preview
RH-4353GU
Бренд: Daewoo Страницы: 21
DAEWOO ELECTRONICS RM-421 Instruction Manual preview
RM-421
Бренд: DAEWOO ELECTRONICS Страницы: 7
Tyco Fire Product Gem AQUARIUS F990 Instruction Manual preview
Gem AQUARIUS F990
Бренд: Tyco Fire Product Страницы: 12
Grundig MS 235 Manual preview
MS 235
Бренд: Grundig Страницы: 24
Comelit 49DPQO06 Technical Manual preview
49DPQO06
Бренд: Comelit Страницы: 8
Rain Bird IQ3G-USA Quick Start Manual preview
IQ3G-USA
Бренд: Rain Bird Страницы: 1
NaanDanJain Viridix Installation Manual preview
Viridix
Бренд: NaanDanJain Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды