manualshive.com logo in svg

Lantronix SLC 8000, Руководство пользователя

Lantronix SLC 8000 - устройство управления консолью, обеспечивающее удаленный доступ и мониторинг для различных устройств. Получите бесплатное Демо руководство на нашем сайте для ознакомления с функционалом продукта. Скачать руководство с сайта manualshive.com и управляйте вашими устройствами эффективно и безопасно.

Поделиться
Скачать
background image

8: Device Ports

SLC™ 8000 Advanced Console Manager User Guide

153

Dial-back

The SLC advanced console manager waits for a peer to call the SLC unit, establishes a text 
(command line) or PPP connection, authenticates the user, and if the SLC 8000 advanced console 
manager is able to determine a dial-back number to use, hangs up and calls the dial-back number 
to establish either a text or PPP connection.

For text connections, the user will be prompted for a login and password, and will be 
authenticated via the currently enabled authentication methods (Local Users, NIS, LDAP, etc). 
The site list will be searched for a site that (a) the 

Login/CHAP Host

 matches the name that 

was authenticated, (b) 

Authentication

 is set to PAP, and (c) the 

Port

 is set to 

None

 or 

matches the port the modem is on. 
If a matching site is found, its 

Timeout Logins

, 

Dial-back Number

, 

Allow Dial-back

, and 

Dial-back Delay

 parameters will be used for the rest of the dial-back connection instead of the 

parameters configured for the modem. Once the remote server is authenticated, if 

Allow Dial-

back

 is enabled for the site and a 

Dial-back Number

 is defined, the SLC unit will hang up and 

wait 

Dial-back Delay

 seconds before initiating the dial-back. The SLC 8000 advanced 

console manager will dial, prompt the user again for a login and password, and a CLI session 
will be initiated. The user will remain connected to the SLC unit until they either logout of the 
CLI session, or (if 

Timeout Logins

 is enabled) the CLI session is terminated if it has been 

idle. 

For PPP connections, the user will be authenticated via PAP or CHAP (determined by the 

Authentication

 setting for the modem). For PAP, the Local/Remote User list will be used to 

authenticate the login and password sent by the PPP peer, and the site list will be searched for 
a site that (a) the 

Login/CHAP Host

 matches the name that was authenticated, (b) 

Authentication

 is set to PAP, and (c) the 

Port

 is set to 

None

 or matches the port the modem 

is on. For CHAP, the site list will be searched for a site that (a) the 

Login/CHAP Host

 and 

CHAP Secret

 match the name and secret sent in the CHAP Challenge response by the PPP 

peer, (b) 

Authentication

 is set to CHAP, and (c) the 

Port

 is set to 

None

 or matches the port 

the modem is on. If the remote peer requests PAP or CHAP authentication from the SLC 8000 
advanced console manager, the 

Remote/Dial-out Login

 and 

Remote/Dial-out Password

 

configured for the modem (not the site) will be provided as authentication tokens. 
If a matching site is found, its 

Dial-back Number

, 

Allow Dial-back

, 

Dial-back Delay

, 

Dial-

out Login

, 

Dial-out Password

, 

Negotiate IP Address

, 

NAT

, and 

Modem Timeout

 

parameters will be used for the rest of the dial-back connection instead of the parameters 
configured for the modem. Once the remote server is authenticated, if 

Allow Dial-back

 is 

enabled for the site and a 

Dial-back Number

 is defined, the SLC unit will will hang up and wait 

Dial-back Delay

 seconds before initiating the dial-back. The SLC 8000 advanced console 

manager will dial, and if the remote peer requests PAP or CHAP authentication, provide the 

Dial-out Login

 and 

Dial-out Password

 as authentication tokens. Once authenticated, a PPP 

session will be established using either negotiated IP addresses or specific IP addresses 
(determined by the 

Negotiate IP Address

 setting). 

Dial-on-demand

The SLC unit automatically dial outs and establishes a PPP connection when IP traffic destined for 
a remote network needs to be sent. It will remain connected until no data packets have been sent 
to the peer for a specified amount of time. 
When this modem state is initiated, the SLC 8000 advanced console manager searches the site 
list for all sites that (a) have a 

Dial-out Number

 defined, (b) have a 

Static Route IP Address

, 

Static Route Subnet Mask

 and 

Static Route Gateway

 defined, and (c) the 

Port

 matches the port 

the modem is on. A dial-on-demand connection will be started for each, waiting for IP traffic 
destined for a remote network. 
When IP traffic needs to be sent, the SLC unit dials the appropriate 

Dial-out Number

 for the site, 

Содержание SLC 8000


















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SLC 8000

ABB Relion REC670 Product Manual preview
Relion REC670
Бренд: ABB Страницы: 138
ABB Relion REC670 Operator'S Manual preview
Relion REC670
Бренд: ABB Страницы: 116
Water Factory Systems N4000 Series Installation, Operation And Maintenance Manual preview
N4000 Series
Бренд: Water Factory Systems Страницы: 15
Samsung MX-T70 Manual preview
MX-T70
Бренд: Samsung Страницы: 60
Samsung MX-F630B Quick Manual preview
MX-F630B
Бренд: Samsung Страницы: 2
Samsung MM-ZB9 Manual De Instrucciones preview
MM-ZB9
Бренд: Samsung Страницы: 24
Samsung MM-B3 Manual Del Instrucción preview
MM-B3
Бренд: Samsung Страницы: 22
Samsung MAX-VJ650 Service Manual preview
MAX-VJ650
Бренд: Samsung Страницы: 23
LAON TECHNOLOGY LT750 Series Quick Reference Manual preview
LT750 Series
Бренд: LAON TECHNOLOGY Страницы: 2
Nelson PRO 6000 Installation & Adjustment Instructions preview
PRO 6000
Бренд: Nelson Страницы: 14
OBSIDIAN CONTROL SYSTEMS NX2 Installation Manual preview
NX2
Бренд: OBSIDIAN CONTROL SYSTEMS Страницы: 16
Viking K-1900-8 Product Manual preview
K-1900-8
Бренд: Viking Страницы: 4
CTE ZED 20.3 HV Instructions For Use And Maintenance Manual preview
ZED 20.3 HV
Бренд: CTE Страницы: 130
B&G electronics PAW-150 Installation And Operation Manual preview
PAW-150
Бренд: B&G electronics Страницы: 8
EAE EE-6435V2.B.PD Installation, Operation, And Parts Manual preview
EE-6435V2.B.PD
Бренд: EAE Страницы: 50
GE Multilin GEK-113328A Instruction Manual preview
Multilin GEK-113328A
Бренд: GE Страницы: 218
2N Telekomunikace 2N IP Style Brief Manual preview
2N IP Style
Бренд: 2N Telekomunikace Страницы: 20
THOMSON DS120ICD Operating Instructions Manual preview
DS120ICD
Бренд: THOMSON Страницы: 63

Бренды по названию

Популярные бренды

Загрузить еще бренды