Lantronix SLC 8000, Руководство пользователя

Страница: 162 / 337

9: USB/SD Card Port
SLC™ 8000 Advanced Console Manager User Guide 162
Text Mode
Group Access If undefined, any group can access the modem (text login only). If one or more
groups are specified (groups are delimited by the characters ' ' (space), ','
(comma), or ';' (semicolon)), then any user who logs into the modem must be a
member of one of the specified groups, otherwise access will be denied. Users
authenticated via RADIUS may have a group (or groups) provided by the
RADIUS server via the Filter-Id attribute that overrides the group defined for a
user on the SLC 8000 advanced console manager. A group provided by a remote
server must be either a single group or multiple groups delimited by the
characters ' ' (space), ',' (comma), ';' (semicolon), or '=' (equals) - for example
"group=group1,group2;" or "group1,group2,group3".
Initialization Script Commands sent to configure the modem may have up to 100 characters. Consult
your modem’s documentation for recommended initialization options. If you do
not specify an initialization script, the SLC unit uses a default initialization string of
AT S7=45 SO=0 L1 V1 X4 &D2 &c1 E1 Q0
.
Note: We recommend that the modem initialization script always be preceded
with AT and include E1 V1 x4 Q0 so that the SLC unit may properly control the
modem.
Modem Timeout Timeout for all modem connections. Select Yes (default) for the SLC 8000
advanced console manager to terminate the connection if no traffic is received
during the configured idle time. Enter a value of from 1 to 9999 seconds. The
default is 30 seconds.
Caller ID Logging Select to enable the SLC unit to log caller IDs on incoming calls. Disabled by
default.
Note: For the Caller ID
AT
command, refer to the modem user guide.
Modem Command
Modem
AT
command used to initiate caller ID logging by the modem.
Note: For the
AT
command, refer to the modem user guide.
Dial-back Number Users with dial-back access can dial into the SLC 8000 advanced console
manager and enter their login and password. Once the SLC unit authenticates
them, the modem hangs up and dials them back.
Select the phone number the modem dials back on -a fixed number or a number
associated with their login. If you select
Fixed Number , enter the number (in the
format 2123456789).
The dial-back number is also used for CBCP client as the number for a user-
defined number. See
Device Ports - Settings (on page 105) for more information.
Dial-back Delay For dial-back and CBCP Server, the number of seconds between the dial-in and
dial-out portions of the dialing sequence.
Dial-back Retries Specify the number of times to retry dialing back.
Timeout Logins If you selected Text mode, you can enable logins to time out after the connection is
inactive for a specified number of minutes. The default is No . This setting is only
applicable for text mode connections. PPP mode connections stay connected until
either side drops the connection. Disabled by default.
Dial-in Host List From the drop-down list, select the desired host list. The host list is a prioritized list
of SSH, Telnet, and TCP hosts that are available for establishing outgoing modem
connections or for
connect direct at the CLI. The hosts in the list are cycled
through until the SLC unit successfully connects to one.
To establish and configure host lists, click the
Host Lists link.