Landoll Brillion SS16, Руководство оператора

Страница: 48 / 100

2-30 F-1021-0422
TABLE OF CONTENTS
Console w/Clutch Control -
Seed Box Seed Shaft
Assembly
1. Install Spacer w/Magnet on the Right Seed Shaft
between first and second Seed Meters. See
Figure 2-27.
2. Install Sensor Bracket using Seed Meter existing
1/4-20 x 1 Machine Screws, Lock Washers and Nuts.
3. Install Seed Shaft Sensor onto Sensor Bracket.
4. After installation, seed meters need to be zeroed.
See
“Seed Rate Chart” on page 3-9.
Figure 2-27: Seed Shaft Sensor Installation - Optional
Spacer,
0.563 x 0.875 x 5.025
Thrust Washer,
7/8 x 1/2 x 0.6
Meter,
Feed Cut Off
Seed Meter
Spacer w/Magnet
Sensor Bracket
Seed Shaft Sensor
Lock Washer,1/4
Nut,Hex 1/4-20
Meter,
Feed Cut Off
Collar,
3/8 Sq Bore
Set Screw,
1/4-20 x 1/4
Meter,Feed Roll
Seed Cup Adapter
Meter,
Feed Roll
Screw,Mach
1/4-20 x 1
Thrust Washer,
7/8 x 1/2 x 0.6