Landoll Brillion SS16, Руководство оператора

Страница: 90 / 100

5-4 F-1021-0422
TABLE OF CONTENTS
Figure 5-3: Lubrication Points and Intervals -
Optional
Hydraulic Maintenance
IMPORTANT
Lower the unit to the ground, and relieve hydraulic
pressure before attempting to service any hydraulic
component.
WARNING
Figure 5-4: Hydraulic Leak Detection
1. Check the tractor hydraulic fluid level per tractor
owner's manual and after any leakage. Check fluid
level with the cylinders in the retracted position.
2. If a cylinder or valve leaks, disassemble the parts to
determine the cause of the leak. Any time a cylinder
is opened up, or whenever any seal replacement is
necessary, it is advisable to clean all parts and
replace all seals. Seal kits are available from your
Brillion dealer.
3. Check all hydraulic hoses weekly. Look for binding or
cracking. Replace all worn or defective parts
immediately.
4. Transport locks are provided to hold the implement in
a raised position. See Figure 3-5. Do not attempt to
perform any service work under the implement
without first installing the transport locks. Before
servicing any hydraulic component, lower the
implement to the ground and relieve all system
pressure. If a hydraulic component is disconnected,
repaired, or replaced, it will be necessary to purge the
system of air before operation.
See “Purge
Hydraulic Lift System” on page 3-6.
Daily
CAT3 Ball
Hitch
Drawbar
Hydraulic
Cylinder,2 x 3
Hydraulic Harrow
Arm Assembly
50
Hrs
Escaping hydraulic fluid can cause serious
personnel injury. Relieve system pressure before
repairing, adjusting, or disconnecting. Wear
proper hand and eye protection when searching
for leaks. Use cardboard instead of hands (See
Figure 5-4.) Keep all components (cylinders,
hoses, fittings, etc.) in good repair.