3-38
F-581-R1
TROUBLESHOOTING AND CORRECTIVE MAINTENANCE
NOTE
Immediately plug and cap all tube ends and pump ports
and tag each for identification. Have shop rags ready to
manage spills.
4.
Remove the hose assemblies and fittings.
5.
Remove the ten 9/16-18 x 2 hex head cap screws
and hardware holding the drive motor to the truck
frame. See Figure 3-28.
6.
Place the drive motor on a sturdy work bench. Use
wood planks to balance and support the assembly
while on the workbench.
NOTE
When the drive motor must be exchanged, see Bendi
B40i4 Model Parts Manual P/N F-579, for an overview
and replacement parts.
7.
Reassemble the drive motor to the truck by following
the preceding steps in reverse order.
8. Tighten and torque the screws. See Torque
Specifications starting on page 1-17.
Brake Service and Repair
NOTE
A cover will be required. It is destroyed in the removal
process. The Landoll P/N of the cover and seal is
154199.
1.
Remove the motor.
The hydrostatic drive motor
assembly is very heavy and awkward to handle. It
must be supported using an overhead crane as it is
being removed from the truck.
See “To Replace
Hydrostatic Drive Motor Assembly” on page 3-37.
2.
Place the motor on the bearing support.
NOTE
Protect the studs by re-installing the nuts.
3.
Remove and discard the brake cover, item 141. See
Figure 3-29.
Figure 3-29: Remove Brake Cover
Figure 3-30: Extract O-Ring
4.
Extract and discard the O-ring, item 143. See
Figure 3-30.
5.
Compress the spring washer, service kit P/N 157495,
item 108. See Figure 3-31. Compress the spring
using mandrel P/N 157492, with brake service insert
P/N 156198.
Mark the mounting direction of the snap ring.
Figure 3-31: Compress Spring Washer
6.
Remove the snap ring using internal snap ring pliers.
7.
Extractor and pliers. See Figures 6504 and 6505.
Содержание Bendi B40i4
