4
Section 1: Operator Controls
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
7/30/12
Table of Contents
Figure 1-1
Figure 1-2
Figure 1-3
33678
33679
33680
Steering Arm Removal
Refer to Figure 1-1:
1.
Loosen and remove two steering arm retaining bolts.
2.
Slide steering arm up and off of the drive control
stub.
3.
Repeat steps 1 through 2 for other side.
Steering Arm Installation
Refer to Figure 1-2:
1.
Slide steering arm to desired height and install pivot
bolt and nut.
2.
Install bolt and nut in arm adjustment slot.
3.
Adjust arms to desired angle for operation.
Refer to Figure 1-3:
4.
Tighten all fasteners to standard torque. See chart
on page 79.
5.
Repeat steps 1 through 4 for other side.
NOTE: Do not tighten at this time.
Section 1: Operator Controls
