16
Section 2: Seat & Frame
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
7/30/12
Table of Contents
Figure 2-10
Figure 2-11
Figure 2-12
33708
33709
33710
Engine Bumper Guard Removal
Refer to Figure 2-10:
1.
Chock wheels to secure mower and prevent
movement while repairs are made.
2.
Disconnect battery to prevent accidental shock. See
“Battery Assembly Removal” on page 22.
3.
Cut and remove all plastic zip ties securing cables
and wires to the engine bumper guard.
4.
Loosen and remove the locknuts from the Alan head
bolts on the lower bumper frame and remove bolts.
Refer to Figure 2-11:
5.
Loosen and remove the locknuts on the engine
bumper guard bolts secured to the pedestal. Do not
remove bolts until the engine bumper guard is
removed from the unit.
6.
With the lower engine bumper guard bolts removed
and the nuts removed from the bolts on the pedestal,
lift the engine bumper guard up at the front to remove
bolts and back to clear the engine muffler.
Engine Bumper Guard Installation
Refer to Figure 2-11:.
1.
Assemble the engine bumper guard and tighten all
fasteners to standard torque. See “Torque Values
Chart” on page 79.
2.
Align engine bumper guard over the muffler and
attach the front of the guard to the pedestal base with
retaining bolts and lock nuts. Do not tighten until all
bolts have been installed.
Refer to Figure 2-12:
3.
Insure all cables and wires are aligned inside of the
engine bumper guard and not pinched in between
the assembly and the frame.
4.
Align and install the lower engine bumper guard bolts
though the assembly and into the frame. Secure with
the flanged locknuts.
5.
Tighten all the lower engine bumper guard bolts and
the two pedestal retaining bolts until the flanged lock
nuts are firmly secured to the main frame.
6.
With plastic zip ties secure all loose cables and wires
to the engine bumper guard assembly.
NOTE: Ensure that mower is cooled before
performing any repair around the engine and
muffler to prevent accidental burning.
NOTE: Never operate unit with out the rear engine
bumper guard installed to prevent accidental injury
or damage to the mower.
