23
Section 4: Electrical System
7/30/12
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
Table of Contents
Figure 4-4
Figure 4-5
Figure 4-6
33723
33724
33725
Wiring Harness Removal
Refer to Figure 4-4:
1.
Chock wheels to secure mower and prevent
movement while repairs are made.
2.
Disconnect battery to prevent accidental shock. See
“Battery Assembly Removal” on page 22.
3.
For ease of access, remove the seat assembly. See
“Seat and Latch Removal” on page 13.
4.
Cut and remove all the plastic zip ties securing the
wiring harness to the frame.
Refer to Figure 4-5:
5.
Remove control panel and disconnect it from wiring
harness. See ““Control Panel Removal” on page
11.
6.
Disconnect the wiring harness from all brake, seat,
and neutral interlock switches. See ““Main Harness
Wiring Schematics” on page 25 for location of all
connectors.
7.
Disconnect the engine wiring harness connector and
depress the retaining tabs on the main harness
connector and remove from mounting bracket.
8.
Remove the main wiring harness from the unit.
Refer to Figure 4-6:
9.
Disconnect the engine wiring harness from the start
solenoid and the engine wiring. Mark each cable for
reference.
10. Remove engine wiring harness from the unit.
NOTE: Pictures is for reference only, cable
attachments will vary with engine model and type.
