5
Section 1: Operator Controls
7/30/12
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
Table of Contents
Figure 1-4
Figure 1-5
Figure 1-6
33681
33682
33683
Control Arm and Lever Removal
Refer to Figure 1-4:
1.
Chock wheels to secure mower and prevent
movement while repairs are made.
2.
Disconnect battery to prevent accidental shock. See
“Battery Assembly Removal” on page 22.
3.
Disconnect and remove seat pan assembly for easy
access.
4.
Remove steering arm. See “Steering Arm
Removal” on page 4.
5.
Unlock and remove retaining cap on the base end of
the control damper and remove from frame stud.
Refer to Figure 1-5:
6.
Loosen and remove nut on the drive control rod
assembly and remove from steering lever.
7.
Loosen and remove the steering lever retaining nut
and washer.
8.
Remove steering lever bracket from frame mount
bolt. Ensure that the control arm is out in the brake
position and allow it to slide though the frame.
Refer to Figure 1-6:
9.
Unlock and remove retaining cap on the rod end of
the control damper and remove from the steering
lever stud.
10. Loosen and remove spring retaining nut and washer
from the control arm mount bolt.
11. Remove damper stud, pivot bushings, control arm
tension spring, and control arm from the steering
lever.
12. Repeat steps 4 through 11 for other side.
