56
ECO FVT start-up
After connecting the device to the hydraulic circuit and having checked that all the
hydraulic seal components have been assembled correctly, proceed as follows:
1
Slowly open the softener water flow; wait until clean water comes out of the drain.
2
Perform an additional regeneration
3
Check the seal of the installation
4
Check the electrics/hydraulics
5
Open the softened water flow to the system, making sure to check the residual hardness.
6
It is advisable to connect the valve drain with a flexible pipe dia. 20 mm.
KEY
1
Dissolver pipe
2
Overflow
3
Coupling for draw pipe
4
Valve rod
5
Float
6
Float rod
7
Brine valve body
8
Salt container
Note: Plug the unused
overflow using a suitable
plug
(See Fig.5 pos.2).
MAXIMUM
SALT LEVEL
