17
6 - Flow indicator
→ Flashes when outlet flow is detected.
7 - Indicator x1000
→ Appears when the number displayed is greater than
9999.
8 – Programming icon
→ Appears in programming modes.
Commands
A
Press
to go to the next step.
B
Use
and
to adjust the values.
Setting the time of the day (TD)
Set the time in the system.
A
Press and hold
or
until the programming icon replaces
the service icon and the parameter display reads TD.
B
Set the time with
or
.
C
Press
to confirm the selection and return to service mode,
or wait 10 seconds.
Master programming mode
Information
As soon as programming mode is entered, all parameters can be displayed or set as
necessary. Depending on the current programming, some functions will not be displayed
or cannot be changed.
Information
If no button is pressed for 5 minutes in Programming mode (basic or master mode), the
controller returns to Service mode and any changes made are not saved.
Information
Menus are displayed in a defined and incremental order.
Obligatory
In order to save the new settings in programming mode, all the parameters need to be
completed.
A
Press and hold
or
until the programming icon replaces
the service icon and the parameter display reads TD.
B
Set the time to 12:01 PM with
or
.
C
Press
to confirm the selection and return to service mode,
or wait 10 seconds.
D
Press and hold
and
until the programming icon replaces
the service icon and the display format screen appears.
