laguna TS SERIES, Руководство пользователя

Страница: 6 / 78

6
Noise emission
Notes concerning noise emission
Given that there exists a relationship between noise level and exposure times, it is not
precise enough to determine the need for supplementary precautions. The factors
affecting the true level of exposure to operators are clearly the amount of time exposed,
the characteristics of working environment other sources of dust and noise etc. For
example, adjacent machines in other words the level of ambient noise. It is possible that
exposure level limits will vary from country to country.
Specification
Blade
12”max x 5/8” bore
Max cut height 12” blade 3 ¾” [2 ½” at 45 deg]
Max cut height 10” blade 2 ¾” [2” at 45 deg]
Dado capacity
13/16”
Main motor 3,5 hp single phase 220 volts 3450 rpm
Breaker 20 amp
Electrical cable [not supplied]
Up to 20’ 10-3 20’ to 50’ 8-3
Scoring motor [Optional] 1,2 hp single phase 220 volts 3450 rpm
Scoring blade [Optional]
120mm x 5/8” bore
Cast iron [ground] table size
31 ½” x 21 ½”
Miter slot
¾” x 3/8”
Extension table pressed steel with ribs and legs 31 ½” x 35”
Sliding table out rigger table [Optional]
Yes
Cutting width on rip fence
50”
Slider length
4’ 2”
Slider travel
5’ 11”
Weight TS 630 lb
Weight TSS 730 lb
Machine footprint 4’ 10” x 3’ x 2’ 10”H
Machine footprint
4’ 10” x 7’ x 2’ 10”H
Dust port
4”
Large throat plate with leveling screws Yes
Blade guard Yes