laguna TS SERIES, Руководство пользователя

Страница: 43 / 78

43
Motor tries to start but will not turn.
1
/ With the power disconnected from the machine. Try to turn the blade by hand. If the
blade will not turn check the reason for the jamming. Typical reasons is wood jamming
the blade.
2 / Capacitor faulty. Replace the capacitor.
3 / Motor faulty. Replace the motor.
Motor overheats.
The motor is designed to run very hot, but should it overheat it has an internal terminal
overload protector, that, will shut it down until the motor has cooled down, and then it
will reset automatically. If the motor overheats wait until it has cooled down, and restart.
If the motor keeps shuts down, check for the reason. Typical reasons are dull blade,
overfeeding the wood, motor cooling fan clogged or faulty, motor cooling fins clogged
and excessive ambient temperature.
Squeaking noise.
1 / Check that the motor cooling fan is not contacting the fan cover.
2 / Check the bearings.
3 / Check the drive belt.
Blade slows down during a cut.
1
/ Loose drive belt. Re-tension the belt.
2 / Dull blade. Replace the blade or have it re sharpened.
3 / Feeding the wood too fast. Slow down the feed rate.
4 / Insufficient set on the teeth [wood nipping the blade]. Change blade for a blade with
the correct set.
5 / Oil or dirt on the drive belt. Clean or replace the drive belts.
6 / Fence not aligned correctly. Align fence.
Blade overheats.
1
/ Dull blade. Change the blade or re sharpen the blade.
2 / Pitch is too small for the depth of cut. Change to a blade with the correct pitch.
4 / Wood too hard for the selected blade. Change the blade.
Machine vibrates.
1
/ Machine not level on the floor. Re-level the machine, ensuring that it has no
movement.
2 / Damaged drive belt. Replace both belts.
Poor dust collection.
1
/ Check the capacity of the dust collection system. You need a minim of 1000 cubic feet
per minute at the machine. The stronger the dust collection the better.
2 / Check the dust hose is not blocked.
3 / Check that the dust collector is not full.