laguna TS SERIES, Руководство пользователя

Страница: 10 / 78

10
Cabinet
The cabinet has a large footprint and is a welded construction manufactured from heavy
gauge steel plate [4mm [0.16”] thick]. The cabinet houses all the parts of the machine and
the heavy construction ensures that the saw is stable. This weight also helps to absorb any
vibration that is produced during cutting.
Table
The table is manufactured from cast iron [cast iron is a live material and will move over
time] and is provided with a leveling system to ensure that your table remains flat during
the life of the machine. This system allows you to stress the table and take out any
warpage that occurs over time. The table is attached to the cabinet and located with dowel
pins that are removable should adjustment be needed between the miter slot and the saw
blade. On the TS the table is split so that should you require you can fit a sliding table at
a later date.
Trunnion
The trunnion assembly is attached and doweled to the cabinet. It is a heavy cast iron
construction. It houses the motor, saw spindle, riving knife, tilt mechanism, and vertical
movement adjustment. This is the heart for your saw.
The advantage of attaching the trunnion to the case rather than the table is that its weight
is supported by the cabinet and will not twist or distort the table.
Electrical system
The electrical system consists of an electrical motor, start switch, stop switch and
contactor. No cable or plug is supplied as the length of the cable and the type of plug will
be dependant on your installation.
Rip fence.
The rip fence is a “T” square design that gives superior rigidity and is adjustable for
parallel to the blade.
Dust collection.
Dust collection port is located at the back of the machine and is 4” diameter. It connects
to the bottom of the trunnion assembly and collects the sawdust as it leaves the blade.
You will need a dust collection system with a minimum of 1000 cubic feet per minuite.
Throat plate.
On the TS the throat plate is solid cast iron with an insert that can be slid in or out for
easy change between inserts. It is adjustable for level to the table.
The TSS has a fixed throat plate that has inserts that clip in and out. It is also adjustable
for level to the table.