Lada Kalina, Руководство пользователя

Страница: 9 / 168

REMOTE CONTROL SYSTEM
(in the design variant)
The remote control system by
power pack is designed for:
– remote locking (unlocking) of
side doors with simultaneous switch-
ing on (off) of the vehicle protection
mode;
– locking side doors by turning the
key in the driver's door lock;
– locking (unlocking) side doors
with the button from inside the vehi-
cle;
– switching on alarm system in
cases of violating protection zones of
the vehicle;
– switching off alarm system re-
motely or after switching ignition with
your key;
– remote control of electric win-
dow regulators.
To operate the remote control
console (Fig. 2) in the vehicle it
should be activated (trained) using
the training code key (see the sec-
tion «Immobilizer»). After training the
remote control console is also a
working code key of the immobilizer
and serves to unlock engine start.
Training and operation of the system
can be carried out simultaneously
with 4 remote control consoles.
ATTENTION!
Selling any vehicle equipped
with remote control system, with-
out training remote control con-
soles is not allowed. Training of
remote control consoles must be
carried out at vehicle presales
training points or at certified
SSNEs in the presence of the
owner of the vehicle, if the vehicle
owner chooses not to carry out
this procedure, his/her refusal
must be recorded in the vehicle
log book signed by the dealer,
affixed with the company's seal
and signed by the owner. If the
owner of the vehicle loses the
training code key, no claims for
remote control system quality are
accepted.
Remote control system
operation
1. Locking side doors and
switching on protection mode
(in the design variant) with the
help of remote control console.
To lock side doors and switch on
protection mode press lock button
on the console. In this case, side
doors will be locked and at the same
time protection mode will be
switched on, as evidenced by single
flashing of turn indicators and slow
flashing of immobilizer state LED
in the instrument cluster.
If any side door, bonnet or tailgate
(in the design variant) is open when
switching on protection mode (in the
design variant), turn indicators will
flash three times and a single horn
will be given. In order to include open
zones into the protection zone, close
them. The system will behave in the
same way if actuating overheat con-
trol of side doors locks, if locking
(unlocking) is carried out many times
in a short period of time. In this case,
wait for a while, whereafter the sys-
tem operation will be fully restored.
2. Unlocking side doors and
switching off protection mode
with remote control console.
7
Fig. 2. Remote control console