3. Installing Your LaCie Drive
page 37
LaCie Bigger Disk Extreme with Triple Interface
User’s Manual
3.6. Attaching The Drive Stand
The LaCie Bigger Disk Extreme with Triple Interface comes with a
drive stand, that allows it to be placed in an upright position. This
position saves desk space and also helps to improve air flow around
the drive.
The drive stand kit has four pieces: the stand, the stand rail, two
socket screws and a hex key.
1) From the rear of the drive, slide the stand rail into the
side groove of your LaCie drive as shown.
2) Slide the stand forward until its rail touches the face of the drive.
3) Tighten the two socket screws from the underside of the stand,
using the hex key provided, until the stand is firmly in place.
4) When the stand is mounted, your drive should look like this:
1
3
