3. Installing Your LaCie Drive
page 17
LaCie Bigger Disk Extreme with Triple Interface
User’s Manual
3.1. Connecting the Power Supply
There are two cables that are supplied
with the power supply: one cable (A)
connects to the LaCie drive; and the other
cable (B) connects to a power outlet, such
as a wall outlet or a surge protector.
Connect Cable A to your LaCie Drive.
Connect Cable B to the Power Supply brick.
Connect Cable B to a surge protector or wall outlet.
You are now ready to connect the interface cable to your drive and to your computer.
Caution!
•Only use the AC adapter supplied with your specific LaCie drive. Do not use a power supply from another
LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to the
device and void your warranty.
•Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result
in damage to your drive and will void your warranty.
Tech Note:
You may use your LaCie drive when in a foreign country, thanks to its autoswitching 100-240 Volt
power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. Consult
LaCie Technical Support for assistance in choosing the right adapter. LaCie accepts no responsibility for any
damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one
authorized by LaCie will void your warranty.
on
auto
off
FW800
FW800
FW400
USB 2.0
A
B
Power Supply brick
Step 2)
1
2
3
