Labrie Top Select Скачать руководство пользователя

Страница: 86 / 145

Hydraulic System Maintenance

Clean around the filler cap and remove it.

Place a clean container (minimum capacity: 40 US gallons) under the drain plug.

Remove the drain plug under the tank and let the tank drain completely.

Before reinstalling the drain plug, clean it of any metal particles.

Changing Hydraulic Oil

To change the hydraulic oil, proceed as follows:

Empty the hydraulic tank (see

Emptying the Hydraulic Tank

on page 77).

If necessary, clean the strainer, if the truck is so equipped (see

Cleaning the Strainer (optional)

page 79).

Change the return filter element, if necessary (see

Replacing Filter Elements

on page 81).

It should be changed twice a year.

Refill the tank until it is ¾ full according to the oil gauge.
Preferably use an ISO Grade 32 hydraulic oil. This type of hydraulic oil provides excellent wide

temperature range working condition.
For northern regions, a hydraulic oil specific to these regions is strongly recommended.

OTE

The oil must be clean and free of any contamination, metal particles, sand, etc. The use of a

filtering screen is strongly recommended while filling the tank with new oil.

Caution!

Some hydraulic tanks are pressurized (3 to 5 psi). Open the filler cap slowly.

Caution!

Highly contaminated hydraulic fluid must be changed promptly to avoid damaging the
hydraulic system.

It is not recommended to mix different brands or grades of hydraulic fluid in the same
tank.

CAUTION!

Содержание Top Select


















































































































































Результаты поиска

Содержание Top Select

Отзывы:

Похожие инструкции для Top Select

Бренды по названию

Популярные бренды

Labrie Top Select, Руководство по обслуживанию

Результаты поиска

Содержание Top Select

Отзывы:

Похожие инструкции для Top Select

Бренды по названию

Популярные бренды