Labrie Top Select, Руководство по обслуживанию

Страница: 38 / 145

30
General Cleanliness
Chassis Daily Cleaning
To clean the chassis, do the following:
1. Make sure that there is enough clearance above the body to raise it safely.
2.
Start the truck’s engine.
3. Turn ON the pump switch.
4.
Raise the body until the safety prop is free to tilt under it.
5. Release the safety prop using the safety prop handle (Figure 2 - 3) and position it adequately.
6.
Lower the body until it rests on the safety prop.
7. Turn OFF the pump switch.
8.
Stop the engine.
9. Lock out and tag out the vehicle (see Lockout/Tagout Procedure on page 22).
Figure 3 - 2 Body Safety Prop
Be careful not to use pressurized water on cylinder heads, joints or electrical devices such
as limit/proximity switches.
Apply the Lockout/Tagout procedure to prevent accidental/unintentional/unauthorized
engine start-up.
WARNING!
WARNING!