manualshive.com logo in svg

Kyocera TASKalfa 7353ci, Руководство по эксплуатации

Kyocera TASKalfa 7353ci - мощное многофункциональное устройство для офиса. Ознакомьтесь с возможностями и настройками с помощью Operation Manual. Скачайте руководство совершенно бесплатно на manualshive.com и начните использовать принтер в полную силу.

Поделиться
Скачать
background image

1-7

Legal and Safety Information > Notice

Safety Instructions Regarding the Disconnection of 

Power

Caution

: The power plug is the main isolation device! Other switches on the equipment are only functional switches and 

are not suitable for isolating the equipment from the power source.

Attention:

 Le débranchement de la fiche secteur est le seul moyen de mettre l'appareil hors tension. Les interrupteurs 

sur l'appareil ne sont que des interrupteurs de fonctionnement: ils ne mettent pas l'appareil hors tension.

Compliance and Conformity

Hereby, KYOCERA Document Solutions Inc. declares that the radio equipment type TASKalfa 8353ci, and 
TASKalfa 7353ci are in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:
https://www.kyoceradocumentsolutions.eu/index/service/dlc.html

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 and 
Part 18 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void 
the user's authority to operate the equipment.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two 
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including 
interference that may cause undesired operation of the device.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all 
persons and must not be co-located or operating in conjunction with any other transmitter.

Industry Canada ICES-003 Compliance Label: CAN ICES-3B/NMB-3B

* The above statements are valid only in the United States of America and Canada.

NOTE — Use shielded interface cables.

Module name, Option

Software Ver.

Frequency band in which the 

radio equipment operates:

Maximum radio-frequency power 

transmitted in the frequency band in 

which the radio equipment operates:

IB-51 (option)

2.2.6

2.4GHz

100mW

IB-35 (option)

2014.12

2.4GHz

100mW

Transmitter Module(SRD)

2005.11

13.56MHz

0.2nW

Содержание TASKalfa 7353ci




















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TASKalfa 7353ci

VASTEX V-100 Manual preview
V-100
Бренд: VASTEX Страницы: 15
Oki C610cdn Brochure & Specs preview
C610cdn
Бренд: Oki Страницы: 4
Xerox VersaLink C400V User Manual preview
VersaLink C400V
Бренд: Xerox Страницы: 196
Printronix MVP 150 Manual preview
MVP 150
Бренд: Printronix Страницы: 5
Citizen CZ-01 User Manual preview
CZ-01
Бренд: Citizen Страницы: 32
Pantum P2800DW Series User Manual preview
P2800DW Series
Бренд: Pantum Страницы: 111
Oce OP14 Operation Manual preview
OP14
Бренд: Oce Страницы: 66
Kyocera ECOSYS M2635dw Frequently Asked Questions Manual preview
ECOSYS M2635dw
Бренд: Kyocera Страницы: 72
Xerox VersaLink C9000 User Manual preview
VersaLink C9000
Бренд: Xerox Страницы: 255
Oki ES3032a4 User Manual preview
ES3032a4
Бренд: Oki Страницы: 72
WOOSIM WSP-BT200 Operator'S Manual preview
WSP-BT200
Бренд: WOOSIM Страницы: 17
Lexmark CS510de Datasheet preview
CS510de
Бренд: Lexmark Страницы: 2
MINOLTA-QMS MAGICOLOR 6110 Installation Manual preview
MAGICOLOR 6110
Бренд: MINOLTA-QMS Страницы: 52
MINOLTA-QMS ENord magicolor 3100 Installation Manual preview
ENord magicolor 3100
Бренд: MINOLTA-QMS Страницы: 56
MINOLTA-QMS 2060 Service Manual preview
2060
Бренд: MINOLTA-QMS Страницы: 94
MINOLTA-QMS magicolor 2300 DL User Manual preview
magicolor 2300 DL
Бренд: MINOLTA-QMS Страницы: 172
Infinite Peripherals DPP-250 User Manual preview
DPP-250
Бренд: Infinite Peripherals Страницы: 32
Argox PI-10X0 Programming Manual preview
PI-10X0
Бренд: Argox Страницы: 156

Бренды по названию

Популярные бренды

Загрузить еще бренды