Kyocera TASKALFA 300I, Руководство по эксплуатации

Страница: 355 / 426

Management
11-3
11
5
Select [Local Authentication] or [Network
Authentication]. Select [Off] to disable user login
administration.
If you select [Network Authentication], enter the
host name (62 characters or less) and domain
name (256 characters or less) for the
Authentication Server. Select [NTLM] or [Kerberos]
as the server type.
NOTE:
If the login user name and password are
rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the
Authentication Server
If you cannot login because of the setting of the
machine, login with any administrator registered in the
local user list and correct the settings.
If the server type is [Kerberos], only domain names
entered in uppercase will be recognized.
6
Press [OK].
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time
you use this machine.
Login
Use the procedure below to login.
1
If the screen below appears during the operations,
press [Login User Name].
Press [# Keys] to enter the login data using the
numeric keys.
2
Enter the login user name and press [OK].
NOTE:
Refer to the Character Entry Method on
Appendix-10 for details on entering characters.
3
Press [Login Password].
Press [# keys] to enter the login data using the
numeric keys.
User Login/Job Accounting - User Login
Off
OK Cancel
Host Name
Domain Name
NTLM Kerberos
User login administration.
Select authentication method.
Local
Authentication
Network
Authentication
Server Type
Expansion
Authentication
# Keys
08/08/2009 10:10
Status
Login
User Name
Login
Status 08/08/2009 10:10
Enter login user name and password.
Login
Password
abcdef
********
Login to: Local
# Keys
IC Card
Login
Cancel Check Counter
# Keys