Kyocera TASKALFA 300I, Руководство по эксплуатации

Страница: 236 / 426

Default Setting (System Menu)
8-4
Use the procedure below to set the sound options.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Sound and then [Next] of Buzzer.
3
Press [Change] of Volume, Key Confirmation, Job Finish, Ready, or Warning.
4
Select the buzzer volume level, or other sound options.
Original/Paper Settings
Register additional types and sizes of originals and paper.
Custom Original Size Setup
Set up frequently-used custom original sizes. The custom size options are displayed on the screen to select
original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Up to four custom original sizes can be added. Use the procedure below to set a custom original size.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Next] of Custom Original Size .
3
Press [Change] of any one of Custom 1 to Custom 4 , on which you wish to register the size.
4
Press [On], and then press [+],[–] or numeric keys to enter X(horizontal) and Y (vertical) dimensions.
5
Press [OK].
6
Move to the copy, send, or document box screen and press the Reset key.
Adding a Custom Size and Media Type for Paper to Print
Set up a maximum of four frequently-used custom paper sizes. The custom size options are displayed on the
screen to select paper set in the multi purpose tray.
The table below lists the sizes that can be registered.
Input units Dimensions
Inch models X: 2 to 17" (in 0.01" increments)
Y: 2 to 11.69" (in 0.01" increments)
Metric models X: 50 to 432 mm (in 1 mm increments)
Y: 50 to 297 mm (in 1 mm increments)
Input units Dimensions
Inch models H: 5.83 to 17" (in 0.01" increments)
V: 3.86 to 11.69" (in 0.01" increments)
Metric models H: 148 to 432 mm (in 1 mm increments)
V: 98 to 297 mm (in 1 mm increments)