Kyocera TASKALFA 300I, Руководство по эксплуатации

Страница: 299 / 426

Default Setting (System Menu)
8-67
8
Use the procedure below.
The following procedure is an example for specifying the SMTP (E-mail TX) settings.
1
Press the System Menu key.
2
Press [System] and then [Next] of Network to display the network settings screen.
3
Display the item you want to set and press [Change] for that item.
In this example, press [Change] of SMTP (E-mail TX) .
4
Press [On] or [Off].
5
Press [OK].
6
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63 .
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "
On , Frame Type: Auto ".
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of NetWare .
3
Press [On].
4
Press the key for the frame type you want to use.
HTTPS Select whether or not to communicate
using HTTPS.
SSL must be set to
[On] in SSL
Setup on page 8-69 .
On Y
IPP Select whether or not to communicate
using IPP. When selecting [On], set the
IPP default Port Number. Use the IPP
default port 631. Off
Port:631
Y
IPP over SSL Select whether or not to use IPP over
SSL.
SSL must be set to
[On] in SSL
Setup on page 8-69 .
Off Y
Raw Port Select whether or not to receive
documents using Raw Port. On Y
*
Y
: The machine must be restarted after the setting is changed.
N
: The machine does not need to be restarted after the setting is changed.
Item Description
Default
Setting Restarting the
System*