Kyocera KM-4230, Руководство пользователя

Страница: 186 / 310

Job Management
11
11-1
11 Job Management
11.1 Print Job Management
This section provides details on print job management.
11.1.1 Specifying the Job Operation
You can specify the job operation on this machine by setting the printer
driver.
Setup procedure
1
Open the printer driver setup dialog box. (Refer to “Displaying the
Printer Driver Setup Dialog Box” on page 5-1 .)
2
Click the “Job Management” tab, and the select the operation to be
performed after processing from the
Store Job drop-down list.
Delete After Printing The job is deleted after it is printed. The job is deleted even if
the reprint function is used on this machine.
Print and Hold After printing, the job is temporarily held in the memory. The
data is cleared when this machine is turned off. The job that is
temporarily held in the memory can be recalled only when the
reprint function is used on this machine.
Refer to
“Print and Hold” on page 11-2 .
Store to HDD If the optional hard disk is installed, the job is stored on the hard
disk until it is deleted from this machine.
Refer to
“Store to HDD” on page 11-3 .
Store to Memory The job is stored in the memory until it is deleted from this
machine.
Refer to
“Store to Memory” on page 11-4 .
Proof and Print Only a single copy of the job is printed, and the remaining
copies are stored in the memory. The data is cleared if this
machine is turned off.
Refer to
“Proof and Print” on page 11-5 .
Lock Job The job is not printed or stored in the memory until the
password specified at the time of printing is entered on this
machine’s control panel. The data is cleared if this machine is
turned off.
Refer to
“Lock Job” on page 11-6 .