Kyocera KM-4230, Руководство пользователя

Страница: 151 / 310

8
Using the Scan Functions
8-64
8.11 Performing Scan to Internet FAX Operations
With the Scan to Internet FAX operation, the scanned image data is sent
as an attachment to an e-mail address. This operation differs from Scan
to E-mail since the format of the attached file is standardized. The image
data can be transferred between devices supporting the Internet FAX
standard.
The image data is sent with the “Black” Color Mode setting in the TIFF
format at 200
×
200 dpi.
Transmission is carried out using a procedure similar to Scan to E-mail.
✎
Memo
When sending document data by Internet fax, you must check in
advance whether the recipient is capable of receiving Internet faxes.
✎
Note
If “Scanned File Separation” (refer to “Basic Setup of the Scan
Functions” on page 8-11) is enabled and multiple pages of the
document are sent using Internet fax, the data is divided in units of
pages for transmission regardless of the maximum e-mail size setting.
If a limitation exists in the attachment file size of an e-mail, the file can
be divided into smaller files (binary level) to be sent. For details on the
mail segmentation setting, refer to “Setting the E-mail Transmission”
on page 8-66.
However, if the Internet fax data is binary divided, the receiving
Internet fax device may not be able to receive the data. Check that the
receiving device can receive such data in advance.