NetWare Configuration 4-24
4.5.3 How to Set Up Notify
You can specify users or groups of users that are notified if a problem occurs when a
print job is sent to the printer. If the print server is servicing queues on multiple file
servers, you must set up a NOTIFY list for each file server. To set up NOTIFY, use the
following procedures:
1.
Start the PCONSOLE utility.
2.
Select Print Server Information from the Available Options menu.
3.
Select the print server from the menu.
4.
Select Print Server Configuration from the menu.
5.
Select Notify List for Printer from the menu.
6.
Select the printer from the Defined Printers menu.
7.
Press the ESC key at the File Server/Notify Name/Notify Type/First/Next
screen. The Notify Candidates screen appears.
8.
Select the user or user group from the Notify Candidates screen. The Notify
Intervals screen displays.
9.
Set the First and Next intervals for notifying users about printer problems. The
First interval is the number of seconds the network waits before it notifies users
about a print job problem. The Next interval specifies how often in seconds users
are notified. Enter a number for each interval and press ENTER.
10. Press the ESC key and save all changes.
11. Press the ESC key until you see the prompt to exit PCONSOLE. Select Yes and
then press ENTER.
Cover-Preface.book Page 24 Wednesday, August 19, 1998 11:57 AM
