Windows Configuration 5-14
5.
After all necessary files are copied, click on OK to close the Network Settings
dialog and restart the system when prompted. The new protocol and/or services
will not be available until the system is restarted.
Assigning the EcoLAN 2000E IP Address
The 2000E must be configured for TCP/IP communication. Please refer to section 5.7
for instructions.
5.7 EcoLAN 2000E TCP/IP Configuration from Windows
Setting Up LPR on the Workstation
If the printer driver has not already been installed, please install it from the CD which
is shipped with the printer before continuing. In the following instructions, some
field or dialog names may vary depending upon the NT release pack in use.
1. In the Program Manager group Main, open the Control Panel and double click on
Printers.
2. Highlight the appropriate printer and select Properties from the Printer menu.
3. Select
Other from the list of ports displayed in the Print to: dialog, then select
LPR port from the list of Print Destinations.
4.
In the Name or address of host providing lpd: field, enter the IP address of the
2000E.
5. In
the
Name of printer or print queue on that server: field, enter any desired
port name, e.g. LPR1 and click on OK to return to the Printer Properties dialog.
6. If the printer is to be shared, click on the checkbox next to Share this printer on
the network. Click on OK when finished.
5.5.3 Windows NT 3.51 Shared Access Printing
5.1.1 Windows Shared Access Printing Overview
Setting a Printer as Shared in Windows NT 3.51
This section covers the steps for a Windows NT 3.51 machine to set a printer as shared
so that other Windows users may access it.
1. In the Program Manager group Main, open the Control Panel and double click on
Printers.
2. Highlight the appropriate printer and select Properties from the Printer menu.
3.
Click on the checkbox next to Share this printer on the network, enter the Share
name, and click OK.
Cover-Preface.book Page 14 Wednesday, August 19, 1998 11:57 AM
