UNIX Configuration 7-9
7.3.3 Setting Up an AIX 4.0 System
Use the following procedures to install a EcoLAN 2000E in an AIX 4.0 system:
1.
Run SMIT Printer.
2.
Select Print Spooling.
3.
Select Add a Print Queue
4.
Select Remote.
5.
Use Standard Processing.
6.
Assign a queue name.
7.
Use the host address of the EcoLAN 2000E for the Remote System.
8.
Use PORT1 for the queue on the remote system.
9.
Add a description (optional).
10. Press e to generate.
Installation is complete. Test your printer by executing the following command:
lp -d<queue_name> <file_name>
7.3.4 Setting Up an HP/UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to a EcoLAN 2000E using the
EcoLAN 2000E lpd. To do this:
1.
At the prompt, type: sam
2.
When a window appears, select Printer/Plotter Manager.
3.
When the menu appears, select List printer and plotters.
4.
When a list appears, select Actions in the title bar.
5.
From the pull-down menu, select Add Remote Printer.
6.
When a window appears, add values to configure EcoLAN 2000E. See the follow-
ing example.
Input Requested
Example
Description of Inputted Data
Printer Name
myprinter
name to be used in lp command
Remote System Name
fastprint
EcoLAN 2000E
hostname as in /etc/hosts
Remote printer Name
PORT1
lpd queue name
Cover-Preface.book Page 9 Wednesday, August 19, 1998 11:57 AM
