Kyocera CS-3035 Copystar, Руководство по эксплуатации продукта

Страница: 40 / 51

P R O D U C T G U I D E
P R O D U C T O P T I O N S
Paper Handling/ Throughput Options
Paper throughput will be of particular interest to
many customers. All three models come stan-
dard with embedded duplex, 500 x 2 universal
drawers and a 200 Sheet Multipurpose Tray
(MPT). Paper capacity can be maximized for
busy Workgroup environments who may have a
higher paper requirement.
3,000 Sheet Paper Deck
For Workgroups looking for maximum paper
quantity, the PF-750 Paper Deck is capable of
holding 3,000 Sheets of Letter (8
1 /
2
” x 11”) sized
paper. Like the standard paper drawers, the
PF-750 Deck can accommodate paper weights
from 16 to 28 lb. Bond. With the PF-750 option
added, maximum paper capacity is 4,200
sheets from four sources.
500 x 2 Universal Drawers
Some Workgroups may be less interested in
capacity, and more interested in the number of
paper sources and media size. For these cus-
tomers, the PF-700 Dual Paper Drawers can
be added. The PF-700 offers a 500 x 2 configu-
ration that can accept paper sized from state-
ment to ledger (5
1 /
2
” x 8 1 /
2
” - 11” 17”). Paper
weights of 16 to 28 lb. Bond are accepted. With
the PF-700 Dual Paper Drawers installed, max-
imum capacity is 2,200 sheets from five
sources. The PF-700 Option also increases the
total capacity of Legal and Ledger size media
from 1,200 sheets to 2,200 sheets. Customers
in Legal and Financial markets will find this
configuration beneficial, as well as any cus-
tomer who’s finishing requirements will involve
Saddle Stitched Booklets.
Finishing/Output Options
The new CS-5050, CS-4050 and CS-3050
MFPs will be installed and utilized in many
environments where document finishing will be
a strong requirement. With a number of finish-
ing and output options available, the right
choice is essential for your customer.
3,000 Sheet Multi-Finisher
The DF-710 Multi-Finisher offers the most func-
tionality of all the finishing options available for
these models. Designed like the DF-650
Finisher for the Enterprise MFPs, specific
options based on customer need can be added
to the DF-710, simplifying the choices that your
clients will need to make.
Page output on the DF-710 Finisher can be
delivered to three areas in standard configura-
tion. These area include the Main Tray, which
can stack up to 3,000 Sheets , Sub Tray (B),
which holds 200 Sheets, and the new Sub Tray
(C), which can hold 50 Sheets.
Stapling on the DF-710 is multi-position, with
the ability to staple up to 50 sheets. Stapling
positions include: Top Left, Bottom Left, and
Center Bind (Two Staples).
4 0