Kyocera CS-3035 Copystar, Руководство по эксплуатации продукта

Страница: 19 / 51

P R O D U C T G U I D E
C O N N E C T I V I T Y
Connectivity
The ability to integrate seamlessly into an
Administrator’s network is an asset for any
Workgroup or Enterprise. Simple installation,
minimal interaction and reduced troubleshoot-
ing are all items on any IT departments wish
list.
The OPTIMIZE strategy, targeted at IT, is one
of the many factors that customers will find
beneficial when they invest in the new
CS-5050, CS-4050 and CS-3050 MFPs. This
strategy is to provide intuitive, efficient and pro-
ductive network components, from the MFP
hardware to software and utilities that assist in
the day to day management and solution imple-
mentation that an Information Technology
department faces.
Network Setup
The new Workgroup MFPs connects quickly
and efficiently to the network in any environ-
ment. The Single Board Controller offers a
standard 10/100BaseTX interface that can be
controlled directly from the desktop with the
web-based
Kyocera Command Center (KCC) .
This useful tool can be accessed from most
Web Browsers, including Internet Explorer,
Netscape Navigator, Mac’s Safari or any other
browser currently supported.
The IP Address can be assigned to the device
(static or dynamic) from the Control Panel or
the
Quick Setup Tool . Once the appropriate IP
scheme has been designated, the Kyocera
Command Center can be accessed, and
advanced networking commands and settings
can be entered. This web page can be given a
password and secured, so only authorized
Network Administrators can change settings
when the need arises.
What’s most important to your customers and
IT contacts is that full network control of the
CS-5050, CS-4050 and CS-3050 is available at
the desktop, so Administrators can focus on the
day-to-day tasks of their job, and not have to
devote their time to managing the MFP.
From Kyocera Command Center, administra-
tors can also set the IP Filters, turn on/off the
IPP (Internet Printing Protocol), and set e-Mail
(SMTP and POP3) and Management settings
at the desktop.
Business environments that determine that
Network Authentication is required at the
device can set the proper Authentication set-
tings in Kyocera Command Center.
With Kyocera Command Center, the ability to
select and designate any network setting pro-
vides administrators with a powerful tool that
can simplify their day-to-day tasks.
1 9
From the web-based Kyocera Command Center,
Authentication can be set for NTLM or KERBEROS.