Kyocera CS-3035 Copystar, Руководство по эксплуатации продукта

Страница: 25 / 51

P R O D U C T G U I D E
P R I N T
The advantage of the Kyocera KX Driver is that all of the features are
available from the desktop, providing a strong choice for the busy
Workgroup and Department environment.
Figure 1 displays the Publishing Tab within the KX Driver. From this tab,
Front and Back Covers, as well as Inserts can be selected for profes-
sional output. When selecting Covers and Inserts, different paper trays
can be assigned, including the MPT.
Figure 2
Figure 2 displays the Finishing Tab and available options when sets
need to be completed. From the Finishing Tab, staples can be added
to the Top or Bottom Left, Left Side (Book) or a Center Bind. If the
optional 2/3 Hole Punch Unit has been added, punched documents can
be output for inclusion with a two or three ring binder.
Figure 3
Figure 3 shows the Imaging Tab of the KX Driver side by
side with the Grayscale Adjustment Settings window for
contrast and brightness. When changed, the grayscale
image of the Earth changes according to the amount
selected on the slidebar.
Figure 4
Figure 4 is the Properties Screen found when the KX
Driver is accessed from the Control Panel. Options such
as Finishing and Paper Handling can be configured man-
ually, or by utilizing the Auto Configure button (in Network
environments). Companies that are interested in cost
accounting and security will find the ability to set these
features from the Administrator button extremely helpful.
Figure 3