Kyocera Mita Ecosys FS-1800, Руководство пользователя

Страница: 91 / 249

Operating the Operator Panel
1-81
8
Check that the message display has changed to Waiting, then press
the GO key. This writes the file to the memory card and instructs the
printer to automatically print out a CompactFlash card write
information page as shown below.
Partition Type . Type of data written (currently only type 2 is supported).
Partition Name . The destination name of data written to the card.
Write Partition Length . The size of the written data on the CompactFlash
card.
Others
. Error information.
When the CompactFlash card write information page is printed, the
message display returns to
Ready
.
If the writing was not completed successfully, an error code appears
on the message display. For details, see section 4.3.3 Error
Messages on page 4-9 . If this happens, press the GO key. The
message display returns to
Ready
.
9
Repeat above steps until you have transferred all data (files) that
you want to write to the CompactFlash card. Each time you finish
writing data, a CompactFlash card write information page is printed
from the printer showing the information explained in step 4 above,
but pertaining only to the data just written. To see all data contained
in the CompactFlash card at once, print a list of data names as
explained on page
1-82
,
Printing a list of data names
.
Deleting Data from a CompactFlash Card
It is possible to use the printer to delete data from a CompactFlash card
one by one.
First check that the CompactFlash card is writable (for example that the
CompactFlash card is not write-protected, and data exists on the card).
Otherwise, the
>Delete data
menu will not be shown on the message
display.
Formatting a CompactFlash card
Formatting allows data to be written to the card. A new CompactFlash
card must be formatted before it can be used in the printer.
Formatting destroys any existing data on the CompactFlash card.
Note