Kyocera Mita Ecosys FS-1800, Руководство пользователя

Страница: 172 / 249

Print Quality Problems
4-4
Black or white vertical streaks Check the operator panel.
If the
Toner low TK-60
message is displayed and the
ATTENTION
indicator is flashing, install a new toner kit.
See section 3.1 Toner Container Replacement on
page 3-2 .
Clean the charger wire.
Open the printer side cover. Pull the green main charger
wire cleaning knob slowly in and out a few times. See
section
3.3 Cleaning on page 3-9 .
Faint or blurred printing Check the Ecoprint setting. (See Chapter 1 )
When this setting is On, switch it to Off on the
Operator
Panel
. (See Chapter 1 )
Check the operator panel.
If the
Toner low TK-60
message is displayed and the
ATTENTION
indicator is flashing, install a new toner kit.
See section 3.1 Toner Container Replacement on
page
3-2
.
Set the print density from the operator panel to a higher
level than the current setting. See section
###
on page
#-
# .
Make sure the Paper Type setting is correct.
Clean the charger wire.
Open the printer side cover. Pull the green main charger
wire cleaning knob slowly in and out a few times. See
section
4.2 Print Quality Problems
on page
4-3
Grey background. Check the operator panel.
If the
Toner low TK-60
message is displayed and the
ATTENTION
indicator is flashing, install a new toner kit.
See section 3.1 Toner Container Replacement on
page 3-2 .
Check the print density.
Display the print density menu from the operator panel
and select a lighter density setting. See section
### on
page #-# .
Clean the main charger wire.
Open the printer's side cover. Pull the green main
charger wire cleaning knob slowly in and out a few times.
See section
3.3 Cleaning
on page
3-9
.
Check the main charger unit installation.
Open the printer's side cover. Check if the main charger
unit is securely installed and seated as far as it will go.
See section 3.3 Cleaning on page 3-9 .
(Continued on next page)
Printed Results Corrective Action