Kyocera Mita Ecosys FS-1800, Руководство пользователя

Страница: 67 / 249

Operating the Operator Panel
1-57
Setting the Font Size
You can set the size of the currently selected font. If a fixed font such as
Courier or Letter Gothic is selected, the character pitch setting will appear
instead of this setting.
1
Press the MENU key.
2
Press the
or
key and select
Font >
.
3
Check that Internal is displayed and press the
>
key.
4
Press the
or
key repeatedly until the message display
indicates
>Size
.
5
Press the
ENTER
key, the message display shows a blinking cursor
(
_
).
6
Pressing the
or
key will increase or decrease the value of the
figure where the cursor is blinking. The font size must be set in the
range of 4 to 999.75 points, in 0.25-point increments. You can use the
or
key to move the cursor back and forth through the figures to
rapidly set a large number.
If you want to abandon the setting procedure, press the CANCEL
key.
7
When the desired size is displayed, press the
ENTER
key.
8
Press the MENU key and the message display returns to
Ready
.
>Size
MENU
Font >
Internal
?
>Size
012.00 point(s)
ENTER
>Size
012.00 point(s)
ENTER
MENU