Kyocera Mita Ecosys FS-1800, Руководство пользователя

Страница: 26 / 249

Operating the Operator Panel
1-16
1 — Software Version
This information shows the software (firmware) version and date of issue
of the printer.
2 — Hardware Information
This information shows the currently selected paper source (indicated by
an asterisk), paper size, and various other printer settings.
3 — Memory
This information shows the amount of total memory installed in the
printer, the amount of currently available memory, and the current status
of the RAM disk (see ### on page #-# ).
4 — Page Information
This information shows the currently selected resolution, number of copies
printed to date, and the total page count.
5 — Installation Options
This shows the option(s) currently installed in the printer.
6 — Network Status
If the network interface card is installed on the printer, the firmware
version and the IP address, Subnet Mask, and Default Gateway for the
TCP/IP will be indicated.
7 — Emulation
This shows all available emulations and the currently selected emulation
(marked with an asterisk). The printer is shipped from the factory with
PCL 6 emulation selected.
8 — Error Log
This displays the last three instances of the following four types of errors,
listing them in the order of their occurrence:
KPDL Error Press GO
;
Memory overflow Press GO
;
Print overrun Press GO
;
RAM DISK
err Press GO
. The most recent error is displayed on the top line of the
Error Log. For error remedies, see section 4.3.3 Error Messages on page
4-9 . Error information is cleared when the printer's power is turned off.
9 — Toner Gauge
Indicates the approximate level of remaining toner in the toner container.
When the value is 100, the toner container is full. The closer to 0 the value
is, the smaller the amount of remaining toner.