Kyocera Mita Ecosys FS-1800, Руководство пользователя

Страница: 222 / 249

RS-232C Cable Connection
C-11
6
The printer's RS-232C parameters are factory-set to the following
values:
Baud rate=9600 bps, data bits (character length)=8 bits, stop bits=1,
parity=none
The two RS-232C protocols are XON/XOFF and DTR. The printer
performs both of them simultaneously, using positive logic for DTR.
If you are uncertain as to the printer's current parameter settings,
you can reset them to the values listed above by following the
procedure described on the last page in this manual.
7
Set the computer to the same parameters as the printer. On many
computers this can be done by setting DIP switches before the power
is turned on. Another method is as follows:
With Windows 95 or Windows 98, make settings as follows:
1
Click on
Start
button in the Windows 95/98 Task Bar and align the
cursor with
Settings
, then click on
Control Panel
from among the
items displayed.
2
The control panel folder opens. Double click on
System
.
3
System Properties
opens. Click on the
Device Manager
tab, then
click on the
COM
port to be used.
4
Click on
Properties
button.