This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0164 (2.0)
KY-RAY 3D.03.01 User Manual
Doc.- No.: KY.MAN.0164
Version:
2.0
Date:
16.06.2021
Page:
34 of 36
9
Troubleshooting
Please contact the KYMATI service team if you cannot fix a problem on your own with the
given instructions.
9.1
Diagnostic Information and LED Status
Figure 23: KY-RAY 3D.03.01 Physical Interfaces
Power LED (4)
If power is connected to the device this LED will illuminate. If this LED does not
illuminate check the power connection (see chapter 4.4)
Status LED (5)
The status LED indicates the following operation modes:
Mode
Description
Off
Device failure during hardware initialization
On
System ready
Information LEDs - Upper (6), left (7), bottom (8), right (9)
These LEDs indicates the following operation modes:
Mode
Description
Off
Device startup failed
Only Information
LEDs 7 and 9 are
blinking
Device is in Bootloader Mode
