KYLAND Technology KIEN6000, Руководство пользователя

Страница: 32 / 48

Kyland Telecom
-26-
4 ． After fastening the screws on the wall, mount KIEN6000 in the selected position.
Pass the four screws through the four
Ф
65 holes on the wall-mounting plate and
slip KIEN6000 downwards, as shown in Figure 4-5. Fasten the four screws.
KIEN6000 has now been fastened on the wall or inner wall of cabinet.
Figure 4-5 Schematic diagram for wall-mounting process
4.3 Cable connection
After properly mounting KIEN6000, it is ready for cable mounting and connection,
mainly including cable connection for the following interfaces:
1
．
Service interface
KIEN6000 provides 10Base-T/100Base-TX RJ45 Ethernet interface for the
connection to end equipments in straight-through way and to network
equipments in cross-over way.
2 ． Network management interface connection
KIEN6000 is connected with the serial port of control computer via the
CONSOLE port of the top panel. Users can make a network management line
with proper length according to Figure 3-7.
3
．
Power connection