KYLAND Technology KIEN6000, Руководство пользователя

Страница: 20 / 48

Kyland Telecom
-14-
of all indication lights on the front panel.
Table 3-1 LED Indicator Description
LED Condition State
System state LED
On
The optical fiber interface of the switch is set as redundant
mode and the unit is set as remote.
Blinking
The optical fiber interface of the switch is set as redundant
mode and the unit is set as remote. .
4
、
8RUN
OFF
The optical fiber interface of the switch is set as common
direction connection mode.
On
The optical fiber interface of the switch is set as redundant
mode and the unit is set as remote.
Blinking
The optical fiber interface of the switch is set as redundant
mode and the unit is set as remote. .
1
、
2 RUN
OFF
The optical fiber interface of the switch is set as common
direction connection mode.
Power LED
On POWER 1 is connected and operates normally.
POWER1
Off POWER 1 is not connected or operates abnormally.
On POWER 2 is connected and operates normally.
POWER2
Off POWER 2 is not connected or operates abnormally.
Optical fiber interface state LED
（
optical fiber interface 4, 8
）
On
Effective network connection has been established for the
port.
Blinking Network activities are available for the port.
LINK/ACT
Off
No effective network connection has been established for the
port.
Ethernet RJ45 port state LED
Each RJ45 Ethernet port has two indicators, a yellow lamp and a green lamp. The yellow
lamp indicates port speed, and the green lamp indicates port link state.
On
100M working status
（
i.e. 100Base-TX
）
10M/100M
(Yellow)
Off
10M working status (i.e. 10Base-T
）
On
Effective network connection has been established for the
port
Blinking Network activities are available at the port
LINK/ACT
（ Green ）
Off
No effective network connection has been established for the
port.