KYLAND Technology KIEN6000, Руководство пользователя

Страница: 36 / 48

Kyland Telecom
-30-
Chapter 5 Testing Method
5.1 Self-testing process
As soon as the equipment is powered, all the indicator of service ports at the front
panel will blink once at the moment, this indicates the operation of the ports is normal,
after this, the corresponding POW will keep the light on, the RUN lamp (operation
lamp) will keep on light/blink/be off according to the attribute of attribute switch
setting.
5.2 Testing of Ethernet interface
Power KIEN6000 as shown in Fig. 5-1, make any two Ethernet interfaces connect with
the network port of the two testing computers by straight-through network cable,
transmit Ping command mutually, both sides can correctly Ping to each other and no
data package is lost. At the same time, the yellow lamp on the corresponding port
should keep on (computer network interface card operates in 100M state), or keep off
(computer network card operates in 10M state), and the green lamp on the
corresponding port should flash. This indicates the tested hardware of the two electrical
operates normally. The same testing method will be used to test all the rest Ethernet
interfaces (For detailed operation of the Ping command, please refer to the following
examples).
Fig. 5-1 Testing of Ethernet port